Flange pneumatic angle seat valve

Flange pneumatic angle seat valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

Flange pneumatic corner seat valve is widely used in food and chemical processes, sterilizers, high-pressure disinfectors, dry cleaners, dryers, beer production lines and so on.

Compared with traditional angle valve, flange pneumatic angle valve has the following new characteristics:

1, flange pneumatic angle valve visual position indication: can be connected to limit switch or emergency manual device.

2, easy to install: pneumatic control head can make 360 'rotation, or even limit switch can also be 360' rotation. One or two limit switches can be installed conveniently.

3, advanced pneumatic controller: thickening engineering plastic shell, safe and reliable. Low wear piston structure, large capacity and low gas consumption. Internal components self lubrication, maintenance free.

4, there are a variety of control methods: normally open, normally closed, double acting.

5, a smaller pneumatic actuator is required: the fluid will head when it flows from the top of the stem.

6, easy to connect: MAMUR standard connection, embedded metal connector. A smaller control head can be selected.

7, flange pneumatic angle seat valve long life guide rod: valve stem Teflon (PTEE) seal, to avoid the introduction of dirt. Self lubrication, maintenance free. The stem is specially treated to ensure optimum fixation and automatically correct the position.

8, no water hammer function: when the fluid flows from the bottom of the stem, the water hammer (water impact force) is absorbed.

9. Advanced valve body mechanism: flow volume is 30% larger than common angle seat, smaller volume, better fluid flow condition. Stainless steel 316 body, teflon seal, high temperature resistance, corrosion resistance. Single acting angle seat valve has the advantages of simple structure, beautiful shape, quick assembly and disassembly, quick switch, flexible operation, small fluid resistance, safe and reliable use.

10. All the steel parts are made of acid-resistant stainless steel, and the sealing parts are made of food silicone rubber or polytetrafluoroethylene, which conform to the food hygiene standards. Widely used in food, wine, beverages, dairy products, fine chemical pharmaceuticals and bioengineering and many other industries.

11. Application scope of flange pneumatic corner seat valve: used in filling equipment, beer beverage, textile printing and dyeing, medical equipment, biological pharmaceuticals, disinfection and sterilization, food industry, rubber and plastic machinery, HVAC, etc.

Structural characteristics

The flange pneumatic angle seat valve has large flow rate, small flow resistance and no water hammer.

The Y design enlarges the flow section of the valve cavity, making the fluid in the valve cavity more smoothly and increasing the flow rate of 30%.

Super long service life:

The valve stem is made of 316L stainless steel, and the seal is made of PTFE. The valve stem is automatically corrected and lubricated without maintenance.

Main shape connection dimensions


The way to
L
C
f
D
D1
D2
H
A
B
N-Φd
Actuator
15
120
14
2
95
65
40
137
180
64
4-Φ14
Φ50
20
130
14
2
105
75
50
145
185
64
4-Φ14
Φ50
25
140
14
2
115
85
60
173
210
80
4-Φ14
Φ63
32
150
16
2
135
100
70
210
240
80
4-Φ18
Φ63
40
180
16
2
145
110
80
260
245
80
4-Φ18
Φ63
50
195
16
2
160
125
92
300
295
100
4-Φ18
Φ80
65
230
18
2
185
145
115
315
320
126
4-Φ18
Φ100
80
250
18
2
195
160
130
330
330
126
8-Φ18
Φ100
100
280
18
2
215
180
150
350
360
156
8-Φ18
Φ125


The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.Flange pneumatic angle seat valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!